Necron Canoptek Spyder
KHORNE WORLD EATERS LORD ZHUFOR by Daith
Fujita's dinner
Tuesday, 15 May 2012
CMON Lovelies
Fortune Hunter Dive Soldier
Necron Canoptek Spyder
KHORNE WORLD EATERS LORD ZHUFOR by Daith
Fujita's dinner
Necron Canoptek Spyder
KHORNE WORLD EATERS LORD ZHUFOR by Daith
Fujita's dinner
Glutton For Punishment - Part 1
Here are the images, of the Raging Heroes Heroic SciFi Version, metal kit, Gluttony, straight out of the packet (clicky for biggy) ...
Review text to follow.
I have had this base (60 mm), sculpted, for some time (i.e. mainly cat litter and bog-standard filler, sculpted with a 1mm drill and dental tools); perfect opportunity, here, for meaty goodness (clicky for biggy) ...
The Meat
(1) Primed with (GW Chaos) black,
(2) Basecoated with MP Sand,
(3) Washed with MP Chestnut Brown Ink,
(4) Washed with W&N Peat Brown Ink (allowing to pool in edges),
(5) Washed with Tamiya Clear Red (allowing to pool in all voids),
(6) Washed with Tamiya Clear Red, only puddles (allowing to pool in puddles).
The Poo
(1) Primed with (GW Chaos) black,
(2) Basecoated with MP Sand,
(3) Washed with MP Chestnut Brown Ink,
(4) Sealed with MP Matt Varnish,
(5) Washed with W&N Peat Brown Ink (allowing to pool in voids),
(6) Gradient wash, from top edges, down the sides, with LB Recipe, black wash.
All (except Tamiya) hairdryer-assisted. Daylight lamp used.
It will suffice, for his working base, for now :)
BTW, this is an addition, to an ongoing project ;)
Review text to follow.
I have had this base (60 mm), sculpted, for some time (i.e. mainly cat litter and bog-standard filler, sculpted with a 1mm drill and dental tools); perfect opportunity, here, for meaty goodness (clicky for biggy) ...
The Meat
(1) Primed with (GW Chaos) black,
(2) Basecoated with MP Sand,
(3) Washed with MP Chestnut Brown Ink,
(4) Washed with W&N Peat Brown Ink (allowing to pool in edges),
(5) Washed with Tamiya Clear Red (allowing to pool in all voids),
(6) Washed with Tamiya Clear Red, only puddles (allowing to pool in puddles).
The Poo
(1) Primed with (GW Chaos) black,
(2) Basecoated with MP Sand,
(3) Washed with MP Chestnut Brown Ink,
(4) Sealed with MP Matt Varnish,
(5) Washed with W&N Peat Brown Ink (allowing to pool in voids),
(6) Gradient wash, from top edges, down the sides, with LB Recipe, black wash.
All (except Tamiya) hairdryer-assisted. Daylight lamp used.
It will suffice, for his working base, for now :)
BTW, this is an addition, to an ongoing project ;)
Subscribe to:
Posts (Atom)